MAGURA 120659 MOTORCYCLE CLUTCH PART

HYMEC REPLACEMENT CLUTCH RELEASE CYLINDER

FITTED LENGTH: 67 mm

FEATURES: 82 mm to 84 mm

If you own an older HYMEC clutch system and have one

Replacement Nehomylinders need to look at the current part number

but are not sure, we have developed a method that will give you that

Locate the spare part number.

Remove engine from engine and press

Encoder cylinder, until the operating rod of the Nehomas cylinder completely

is retracted. The piston in the needle cylinder now touches the bronze cap

at the back of the Nehomas cylinder. If the Neh?

no longer works, it can be removed from the pressure line

and the operating rod for the measurement slowly and carefully

into the Nehomas cylinder.

Please note that the measured length is not the actuation length

- the operating length is 16 mm longer than the retracted

Length. After the measurement, please dispose of your old neo-cylinder

not yet, as you may need the cap or the support.

All MAGURA HYMEC replacement nec cylinders are equipped with standard cap

and standard support, as shown in the figures.

If the neo-cylinder you need is between two operating lengths

, always order the longer version and use

Spacer between support and Bowden cable mounting to the actuation length

to your motorcycle.